Location: GoldTech Components Co.,Ltd. » News » RAMPS 1.4 Panel Part Motherboard 3D Printer module Shield Red Black Controls Ramps1.4 control board

News

    Contact Us

    RAMPS 1.4 Panel Part Motherboard 3D Printer module Shield Red Black Controls Ramps1.4 control board

    Overview
    Quick Details
    Place of Origin:
    china
    Brand Name:
    gd
    Model Number:
    3D Printer module

    Packaging & Delivery

    Selling Units:
    Single item
    Single package size: 
    0.1X1X0.5 cm
    Single gross weight:
    0.01 kg
    Package Type:
    original pacakge
    Lead Time :
    Quantity(Piece) 1 - 100 >100
    Est. Time(days) 4 To be negotiated
    Product Description

    RAMPS 1.4 Panel Part Motherboard 3D Printer module Shield Red Black Controls Ramps1.4 Control Board


    Specifications


    Ramps 1.4:

    This list is Pololu trillion rupiah , or ramps short. It was designed as a low-cost small package RepRap needs to accommodate the entire electronics . Oblique interfaces with the powerful Arduino MEGA platform Arduino Mega , and have plenty of room for expansion. On the stepper drives and a Arduino MEGA shield extruder control electronics for easy maintenance , replacement parts , upgrades and expansion capabilities , including plug-in modular design . In addition, some Arduino expansion boards can be added to the system , as long as the main ramp plate is saved to the top of the stack .

    The board is mainly based on Adrian 's Pololu_Electronics and work Tonok 's . The proposed anti- Vick copper etching method . Vick is also inspired by the work of EasyDrivers . Adrian'sPololu_Electronics circuit design mainly based on Joaz RepRapSource.com provide initial pin definitions and many design improvements. Too much inspiration , advice, and from Prusajr, Kliment, Maxbots, Rick, and many other ideas RepRap community.

    Features:

    It has Cartesian robots and regulations of the extruder .

    Extended to control other accessories.

    Heater / MOSFET outputs and three fan thermistor circuit.

    Integration of additional security 5A and component protection

    Control of additional heating bed 11A fuse

    Suitable for 5 Pololu stepper driver board

    Pololu board pin socket, so they can be easily replaced or removed for future designs .

    I2C and SPI pins left for future expansion.

    Hooked into all MOSFET PWM pin versatility.

    Servo type connector is used to connect to the end stop , the motor and the light-emitting diodes. These connectors are gold-plated , rated current of 3A, very compact.

    On the SD card to add - is now available from the Kliment - Sdramps

    LED indicate when the heater output

    Option 2 motors connected to Z Prusa Mendel



    403 Forbidden

    403 Forbidden


    nginx/1.13.3